The Easy Way

The Tank The Easy Way

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #23842
    weyjohn
    Participant

    An inexpensive corded torque wrench would not remove my 13 year old anode.

    The Milwaukee M18 Fuel with 1100 foot pounds of unscrewing torque did it without even breathing hard. This is a cordless battery tool.

    So I just ordered a couple of the .9 inch magnesium anode rods from Larry.:)

    #23850
    Larry Weingarten
    Participant

    Hello, Thanks for the nice tool info. My experience with Milwaukee tools has almost always been good. I hope it was Randy yo dealt with for anodes though! 😎

    Yours, Larry

    #23906
    harrisplumber
    Participant

    Thanks for letting us know here, i would defiantly try this whenever needed. i hope this could be the easy way as you have mentioned.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Water Heater Rescue

You cannot copy content of this page