One inch hex nut

The Tank One inch hex nut

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #23830
    weyjohn
    Participant

    Anode rod looks like it will require a one inch impact driver socket for removal. Has anyone encountered this before?

    John

    #23833
    Randy Schuyler
    Keymaster

    You need a 1 and 1/16-inch socket for practically every anode used in North America.

    Randy Schuyler

    #23835
    weyjohn
    Participant

    You are right. 1 inch will not fit. 1 1/16 is a sloppy fit, but it is the correct size.:)

    #23837
    Larry Weingarten
    Participant

    Hello, If you use a six point, rather than a twelve point socket, things will go better . 😎

    Yours, Larry

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Water Heater Rescue

You cannot copy content of this page