No hot water

The Tank No hot water

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #7204
    sassyladyok
    Participant

    I purchased a Whirlpool electric hot water heater 2 months ago and it was working fine but all of a sudden, no hot water and the green light is not lit up. I checked the fuse box but nothing tripped there. What else should I check? Help!

    #7207
    Randy Schuyler
    Keymaster

    The first thing to try is, turn off the power, take off the element cover, if it’s a single-element heater, or the upper cover if it’s dual, remove the insulation and press the reset switch. Then put everything back the way you found it and turn on the power.

    If it trips again, though, go to Troubleshooting from the home page here, then to Tanklets, then to Electric water heater issues. There is a walkthrough there of possible problems. If it’s Greek, hire a plumber. Electricity is quite dangerous.

    Randy Schuyler

    #7209
    sassyladyok
    Participant

    Thanks Randy, that worked and I have hot water again!

    Toni

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Water Heater Rescue

You cannot copy content of this page