- This topic has 5 replies, 1 voice, and was last updated 4 years, 7 months ago by .
- Posts
I have a state water heater(censible). I am not sure how old it is we got it with the house back in 2008. The pilot flame kept going out so, I have replaced the thermal coupling on two different occasions. Now the pilot light will stay lit but the burner won’t come on.
I’ve looked all over the Internet and YouTube and I’m still lost. Any help would be greatly appreciated thank you.
Hello: Best thing for us to help would be a photo of the front lower part of the heater, so we can see the controls. If possible, a photo of the name tag, with numbers on it would be helpful too. I’d like to see also if the pilot flame is hitting the thermocouple enough. Perhaps you can describe that to us? 😉
Yours, Larry
Also, read the entry in Tanklets for FVIR issues. You may need to dust the air screens. There is a link for Tanklets on the left side of the Tank topics index.
Randy Schuyler
- You must be logged in to reply to this topic.