Reply To: Parts Mismatch on a Kenmore Powermiser Electric water heater

The Tank Parts Mismatch on a Kenmore Powermiser Electric water heater Reply To: Parts Mismatch on a Kenmore Powermiser Electric water heater

#19088
Ej
Participant

If the thermostat was submerged then yes replace it. Even if it isn’t the problem. If you want to be sure you can check to see if the thermostat is open or closed at a given water temp. Do this by placing your meter on the N/C side of the thermostat and to the other leg where it comes into the high limit reset.

Water Heater Rescue

You cannot copy content of this page