• a .84-inch-diameter (a quarter more anode than what usually comes with a 6-year-warranty water heater) standard magnesium hex-head anode rod (about 46 inches of overhead clearance needed)
• curved dip tube
• ball-valve drain assembly with cap
• Water Heater Workbook
• pipe thread seal tape
• instructions
• service sticker

Fits all water heaters that come with a hex-head anode and have 3/4-inch plumbing.

• pipe wrench
• socket wrench with 1 1/16-inch socket
• adjustable pliers
• drill with 7/8-inch hole saw
• basin wrench
• hammer
• flat-bladed screwdriver

The products offered here are designed to make water heaters last longer, or solve specific problems. Installation is potentially do-it-yourself, but if you have the least doubt about your abilities, we suggest that you obtain expert help.

Shipping is by UPS within the contiguous United States. UPS does not deliver to post boxes. Allow up to a about week for delivery. Hawaii and Alaska are only served by Priority Mail and can use a post box. We do not ship outside the United States.

1. Are you ordering the right anode? This anode requires its own port in the water heater and is usually a replacement. Make sure you have a hex-head rod in your tank and not a combo (outlet) anode.

2. Measure your water heater from the top to the drain valve and send the measurement to us at mail@waterheaterrescue.com. There are a few tanks that are shorter than average that require a shorter curved dip tube.

3. If you're getting a maximum-insulation tank, as we recommend, tell us so that we can include a 4-inch drain valve nipple.

If you have any doubts about what you're ordering, be sure and e-mail your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com

Price: $92