|
1. Are you
ordering the right anode? This anode requires its own port in
the water heater and replaces the factory anode. Make sure you
have a hex-head rod in your tank and not a combo (outlet) anode.
If you have a two-anode tank, both factory anodes must be removed
for this one to eliminate odor. Also tell us the brand of your
heater.
2. Measure
your water heater from the top to the drain valve and send the
measurement to us at mail@waterheaterrescue.com. There are
a few tanks that are shorter than average that require a shorter
curved dip tube.
3. If you're
getting a maximum-insulation tank, as we recommend, tell us so
that we can include a 4-inch drain valve nipple.
4.
If you soften your water, think twice about buying this product.
Often it doesn't fix the problem. Think about a powered anode,
which always works.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
