|
What's
included
|
- a .84-inch-diameter (a quarter more anode than what usually
comes with a 6-year-warranty water heater) magnesium hex-head
anode rod
(about 46 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
Fits all water
heaters that come with a hex-head anode.
|
|
What
does it do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
needed
|
| Socket
wrench and 1 1/16-inch socket. For further details, check out the
Tools
page and Know-how.
|
|
Return
policy
|
|
Merchandise
in original condition can be returned for a full refund of the
purchase price, less shipping. E-mail mail@waterheaterrescue.com
for instructions.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Shipping is
by UPS within the contiguous United States. UPS does not deliver
to post boxes. Allow up to a about week for delivery. Hawaii and
Alaska are only served by Priority Mail and can use a post box.
We do not ship outside the United States.
|
|
Important:
Before you order
|
|
Are you ordering
the right anode? This anode requires its own port in the water
heater and is usually a replacement. Make sure you have a hex-head
rod in your tank and not a combo (outlet) anode.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
| |
Price: $38
|
|
 |
|
