|
What's
included
|
- a .75-inch-diameter magnesium combination (also known as outlet)
anode rod
(about 48 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
This kind
of anode screws into the hot-water port and can either replace
another combo rod or augment a hex-head anode. Rheem/Ruud/Richmond/GE
changed its design in about 2005 so that the hot-water port extends
below the threads. To use a standard combo anode, one must drill
out the port and even then, there is a risk that there will not
be enough space between the hot-water outlet and the port wall
to permit water to pass. The anode included here solves that problem.
|
|
What
does it do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
needed
|
| Pipe
wrench. For further details, check out the Tools
page and Know-how.
|
|
Return
policy
|
|
Merchandise
in original condition can be returned for a full refund of the
purchase price, less shipping. E-mail mail@waterheaterrescue.com
for instructions.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Shipping is
by UPS within the contiguous United States. UPS does not deliver
to post boxes. Allow up to a about week for delivery. Hawaii and
Alaska are only served by Priority Mail and can use a post box.
We do not ship outside the United States.
|
|
Important:
Before you order
|
| |
|
|
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
| |
Price: $46
|
|
 |
|
