|
What's
Included
|
- a .75-inch-diameter magnesium combination (also known as outlet)
anode rod
(about 12 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
This kind
of anode screws into the hot-water port and can either replace
another combo rod or augment a hex-head anode. Rheem/Ruud/Richmond/GE
changed its design in about 2005 so that the hot-water port extends
below the threads. To use a standard combo anode, one must drill
out the port and even then, there is a risk that there will not
be enough space between the hot-water outlet and the port wall
to permit water to pass. The anode included here solves that problem.
|
|
What
Does It Do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
Needed
|
Pipe
wrench. For further details, check out the Tools
page and Know-How.
A Warning
If you buy
one of these, don't play with it. These are regular anodes that
have been milled down to the core wire on a lathe. That wire can
be bent and straightened about three times, then it snaps.
|
|
Return
Policy
|
|
Merchandise
in original condition can usually be returned for a full refund
of the purchase price, not including shipping. E-mail mail@waterheaterrescue.com
for instructions and authorization.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Remember also
that if you have difficulties with installation, odds are that
a professional or handyman will know a way to do it.
Shipping is
by UPS within the contiguous United States. UPS does not deliver
to post boxes. Allow up to a about week for delivery. Hawaii and
Alaska are only served by Priority Mail and can use a post box.
If you are in CANADA, go to our
PayPal Standard cart and order from there.
|
|
Important:
Before You Order
|
|
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
| |
Price: $64
SKU30
|
|
 |
|
