|
What's
included
|
- a powered anode
- pipe-thread seal tape
- instructions
- a brass tee
- two brass nipples
This replaces
the combo anode that came with your tank. Fits all heaters with
3/4-inch ports. This is for use with some Bradford Whites, A.O.
Smiths and States up to 50 gallons.
|
|
What
does it do?
|
- The anode will keep your tank from rusting and breaking, while
alleviating odor problems because of anaerobic bacteria found
in some water that react with regular magnesium or aluminum
anodes to produce hydrogen sulfide gas and a rotten-egg odor.
|
|
Tools
needed
|
| Socket
wrench with 1 1/16-inch socket, pipe wrench. For further details,
check out the Tools
page and Know-how.
|
| |
|
Important:
Before you order
|
|
This anode
must replace the one that came with the tank or the smell won't
go away. If your tank has two anodes, the second one must also
be removed.
If you
have a power vent heater, the power connector will stick up several
inches above the top of the tank and will probably preventreinstallation
of the vent housing.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
Return
policy
|
| Merchandise
in original condition can be returned for a full refund of the purchase
price, less shipping. E-mail mail@waterheaterrescue.com for instructions.
|
| |
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Shipping is
by UPS within the contiguous United States. UPS does not deliver
to post boxes. Allow up to a about week for delivery. Hawaii and
Alaska are only served by Priority Mail and can use a post box.
We do not ship outside the United States.
|
|
|
|
|
| |
This
product is not being offered while we sort out an engineering
issue
|
|
|
|
|
