• a .84-inch-diameter (a quarter more anode than what usually comes with a 6-year-warranty water heater) segmented magnesium hex-head anode rod (about 12 inches of overhead clearance needed)
• pipe-thread seal tape
• service sticker
• instructions

Fits all water heaters that come with a hex-head anode.

Socket wrench and 1 1/16-inch socket. For further details, check out the Tools page and Know-how.

A warning

If you buy one of these, don't play with it. These are regular anodes that have been milled down to the core wire on a lathe. That wire can be bent and straightened about three times, then it snaps.

The products offered here are designed to make water heaters last longer, or solve specific problems. Installation is potentially do-it-yourself, but if you have the least doubt about your abilities, we suggest that you obtain expert help.

Shipping is by UPS within the contiguous United States. UPS does not deliver to post boxes. Allow up to a about week for delivery. Hawaii and Alaska are only served by Priority Mail and can use a post box. We do not ship outside the United States.

Are you ordering the right anode? This anode requires its own port in the water heater and is usually a replacement. Make sure you have a hex-head rod in your tank and not a combo (outlet) anode.

If you have any doubts about what you're ordering, be sure and e-mail your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com

Price: $58