|
What's
Included
|
- a .84-inch-diameter by 44-inch (a quarter more anode than
what usually comes with a 6-year-warranty water heater) magnesium
hex-head anode
rod (about 44 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
Fits all water
heaters that come with a hex-head anode. Can be cut to fit shorter
tanks
|
|
What
Does It Do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
Needed
|
| Socket
wrench and 1 1/16-inch socket. For further details, check out the
Tools
page and Know-How.
|
|
Return
Policy
|
|
Merchandise
in original condition can usually be returned for a full refund
of the purchase price, not including shipping. E-mail mail@waterheaterrescue.com
for instructions and authorization.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
This page
is for shipping to ALASKA or HAWAII by Priority Mail. If
you are in the continental United States or Canada, go back to
the main cart and order
from there or the details page for your area.
|
|
Important:
Before You Order
|
|
Are you ordering
the right anode? This anode requires its own port in the water
heater and is usually a replacement. Make sure you have a hex-head
rod in your tank and not a combo (outlet) anode.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
SKU8, $60,
shipping included
|
|
