|
What's
Included
|
- a .84-inch-diameter (a quarter more anode than what usually
comes with a 6-year-warranty water heater) magnesium combination
(also known as outlet) anode
rod (about 48 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
This kind
of anode screws into the hot-water port and can either replace
another combo rod or augment a hex-head anode. Fits all residential
water heaters with 3/4-inch plumbing.
|
|
What
Does It Do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
Needed
|
| Pipe
wrench. For further details, check out the Tools
page and Know-How.
|
|
Return
Policy
|
|
Merchandise
in original condition can usually be returned for a full refund
of the purchase price, not including shipping. E-mail mail@waterheaterrescue.com
for instructions and authorization.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
This page
is for shipping to ALASKA or HAWAII by Priority Mail. If
you are in the continental United States or Canada, go back to
the main cart and order
from there or the details page for your area.
|
|
Important:
Before You Order
|
|
1. If you
contemplate adding an anode to a new tank, things have gotten
complicated recently. The combo anode will not work in
heaters made in 2005 or later by Rheem/Ruud/Richmond/GE. Also,
if there are two anodes in a tank, they need to be of the same
metal. Otherwise,
the magnesium rod will be consumed more
rapidly in the presence of an aluminum one and
you won't get as long a life. On the other hand, if the tank is
five years old or more, having dissimilar metals is less of an
issue, since the original one will likely be largely consumed.
All the lower-end heaters by A.O. Smith, American, State, Kenmore,
Whirlpool and Maytag have aluminum anodes. We've thought about
stocking aluminum combo rods, but we've preached against aluminum
for 15 years and won't change now just to make a buck. You still
have the option of removing the aluminum hex anode that comes
with the tank and installing two magnesium anodes. A plus is that
ours are thicker than factory ones.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
mail@waterheaterrescue.com
|
|
|
SKU6, $58,
shipping included
|
|
|
