|
What's
included
|
- a .84-inch-diameter (a quarter more anode than what usually
comes with a 6-year-warranty water heater) segmented magnesium
hex-head anode
rod (about 12 inches of overhead clearance needed)
- pipe-thread seal tape
- service sticker
- instructions
Fits all water
heaters that come with a hex-head anode.
|
|
What
does it do?
|
- The anode will keep your tank from rusting and breaking.
- The tape will enable you to remove the anode in future to
check it.
- The sticker will help you remember when you installed it.
|
|
Tools
needed
|
|
Socket wrench
and 1 1/16-inch socket. For further details, check out the Tools
page and Know-how.
A warning
If you buy
one of these, don't play with it. These are regular anodes that
have been milled down to the core wire on a lathe. That wire can
be bent and straightened about three times, then it snaps.
|
|
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Prices include
ground shipping by UPS within the contiguous United States. UPS
does not deliver to post boxes. Allow 2-3 weeks for shipping,
but we usually ship within 24 hours. Hawaii and Alaska are only
served by Second Day Air or Priority Mail. People in those states
should e-mail to learn shipping costs. We do not ship outside
the United States.
|
|
Important:
Before you order
|
|
Are you ordering
the right anode? This anode requires its own port in the water
heater and is usually replaces an old one. Make sure you have
a hex-head rod in your tank and not a combo (outlet) anode.
|
|
Return
policy
|
| Merchandise
in original condition can usually be returned for a full refund
of the purchase price, not including shipping. E-mail mail@waterheaterrescue.com
for instructions and authorization. |
| |
|
Price:
$70, shipping included. California residents add $5.09.
|
|
